Brand Name : Prochema
Model Number : PROX-100
Certification : ROHS
Place of Origin : China
MOQ : 100sqm
Price : USD10 to 15/sqm
Supply Ability : 20000sqm per month
Packaging Details : carton
Product : ito pet film
Roll size : 450,680,1200mm
Thickness : 0.125 or 0.175mm
Base material : PET film
Feature : one side conductive
Resistance : 90-110ohm/sq
Application : Used for EL printing
PROX-100, sheet resistance 100ohm/sq, thickness 0.125 or 0.175mm, roll width 1200mm, used for producing pdlc film, EL panel or touch key etc.
Thermal shrinkage
The ITO COATED PET FILM thermal shrinkage depends on the thermal shrinkage of PET Film.Our FG1 PET film with low heat shrinkage(see data below),are quite suitable for Electroluminescent printing.Due to the thermal shrinkage of ITO PET Film, film sheet need to be cut generally 1% larger than the size of the EL panel,and before printing,need to heat the film for shrinkage to make the film size stable. Generally at 130C for 1 hours .
NOTE :the temperature and time of heat should be higher and longer than the temperature and time of sliver paste heating.
Electrical Uniformity
All ITO PET FILM products feature electrical uniformity of 10% within any one square foot area, defined as the maximum difference from the average ohms per square value within that area. However, touch screen manufacturers typically achieve <1% resistance linearity by orienting their sensors (busbars) so that the electrical current path is always in the direction of the length of the film roll.
Handling ITO PET Film
Vacuum deposited ITO coatings are very thin and are easily scratched or cracked if handled improperly. When removing film from a roll, care should be taken not to bend or crease it. It is important never to allow the ITO coated side to come in contact with a surface, such as a table, during processing operations. Sliding ITO coating over a surface will scratch the coating, resulting in elevated surface resistance and visible defects. Please note that all ITO PET FILM product supplied in sheet form is supplied with protective liner on all surfaces.
Ordering ITO PET FILM Products
PROCHEMA sells ITO PET FILM products in roll form of 250m x 1220mm (cut to 610mm/305mm width ). When ordering rolls of film, please correctly specify the film thickness (microns, mils or gauge units), film width, length of film on each roll and number of rolls desired. Rolls are supplied on 6 inch or 3 inch cores depends on your requirements.
TECHNICAL DETAILS:
PROX-100
Resistance: 100ohm/sq
Thickness: 0.125 or 0.175mm
VLT: 78%
100ohm ito pet film Images |